Driving on slippery roads.- On the road wet or slippery, the vehicle speed must be slowed to avoid a slip when stepped on the brakes.- Adjust the speed of the vehicle and do not make excessive acceleration, braking suddenly or turn the
steering wheel abruptly.
Driving in the mountains.- When vehicles travel in hilly areas will lose power, to prevent this move trasmisi lever into a lower gear for
engine returned to work at normal power, do it as quickly as possible so as not to lose the moment /
energy.- When the path of decreasing energy use engine braking (engine brake) kegigi by moving lower.- Do not hold the brake too long or too often when taking down a long road, because the heat will make the
brake so the brake can not work optimally.
Driving at high speed.When driving at high speed note the following.- Keep the distance required to stop the vehicle a short distance away.- By the time the new rain fall will occur hydropoling (loss of surface adhesion tire with road surface) caused
by a layer of film. This will make it difficult to control steering and braking. To prevent this from happening,
lowering vehicle speed when the road surface began to wet.- At high speeds the vehicle will get the side wind pressure that happens when exiting the tunnel or when
large vehicles pass. To prevent this from happening to adjust the speed of your vehicle.
If the car miredIf the vehicle plunged into the mud or sand, consider the instructions below:- Use first gear and reverse position to swing the vehicle, the movement was carried out to obtain energy or
moment to release the vehicle.- In the swing movement is slowly stepped on the gas pedal to spin the wheels are not high, high spinning
wheel can make even more pent-up tires.
steering wheel abruptly.
Driving in the mountains.- When vehicles travel in hilly areas will lose power, to prevent this move trasmisi lever into a lower gear for
engine returned to work at normal power, do it as quickly as possible so as not to lose the moment /
energy.- When the path of decreasing energy use engine braking (engine brake) kegigi by moving lower.- Do not hold the brake too long or too often when taking down a long road, because the heat will make the
brake so the brake can not work optimally.
Driving at high speed.When driving at high speed note the following.- Keep the distance required to stop the vehicle a short distance away.- By the time the new rain fall will occur hydropoling (loss of surface adhesion tire with road surface) caused
by a layer of film. This will make it difficult to control steering and braking. To prevent this from happening,
lowering vehicle speed when the road surface began to wet.- At high speeds the vehicle will get the side wind pressure that happens when exiting the tunnel or when
large vehicles pass. To prevent this from happening to adjust the speed of your vehicle.
If the car miredIf the vehicle plunged into the mud or sand, consider the instructions below:- Use first gear and reverse position to swing the vehicle, the movement was carried out to obtain energy or
moment to release the vehicle.- In the swing movement is slowly stepped on the gas pedal to spin the wheels are not high, high spinning
wheel can make even more pent-up tires.