Pull the choke switch on the engine, with a cold engine or machine was first turned on (early morning). And do not pull the choke cable is too long because it will lead to wasteful of fuel.
TEMPERATURE MEASURING MACHINE
With the ignition ON position and engine coolant water temperature will be indicated by this indicator, in a normal machine condition indicator will show the temperature between H and C and H when approaching this sign indicates the engine is too hot.
Speedometer / ORDOMETER / tachometer
Speddometer
Indicates the vehicle speed in units of km / hour.
Odometer
Shows the total distance has been traveled by a vehicle. And use this pointer for the benefit of periodic maintenance schedule and service.
Tripmeter
To find a specific mileage from one place to another.
Tachometer
Indicate engine rotation / minute, and do not run the car until the engine rotation speed (red line) this can lead to engine damage.
Indicates the vehicle speed in units of km / hour.
Odometer
Shows the total distance has been traveled by a vehicle. And use this pointer for the benefit of periodic maintenance schedule and service.
Tripmeter
To find a specific mileage from one place to another.
Tachometer
Indicate engine rotation / minute, and do not run the car until the engine rotation speed (red line) this can lead to engine damage.
BATTERY FILLING INDICATOR LIGHT
This light will illuminate when the ignition is turned ON and will die when the engine life. When the light stays on when the engine life indicate a problem in battery charging systems.
OIL PRESSURE INDICATOR LIGHT
This light will illuminate when the ignition is turned ON and the engine is off. Lights will be extinguished if the engine life and this light will remain mrnyala if low oil pressure. If the lamp is lit when the vehicle runs stop cars and check the amount of oil. Add oil if the conditions are lacking. If oil was significant damage to the lubrication system and do not run the vehicle it will cause fatal damage to the machine.
INDICATOR LIGHT
Hand Brake indicator light
The indicator light will illuminate when the ignition is ON and pulled the hand brake lever (activated).
When the indicator lamp lights up when the vehicle runs it shows a problem. When this happens do the following:
1. Menepilah and stopped.
2. Test the brakes carefully run the car and then stop on the road.
3. If you believe the brake still works run the vehicle carefully and to the authorized repair shop.
4. If the brakes do not pull the car to the garage to convince the official.
5. Always remember that braking distances may be longer on the brake injaklah stronger and in normal Events.
If the following conditions occur, check your vehicle torepair shop :
1. Warning lamp lights up, even though the machine was alive and not mengnci hand brake.
2. Warning lamp lights up when the car is running.
3. Warning lamp is not lit when the ignition key in START position.
4. Due to the brake system sets itself automatically, then the brake oil content is reduced in accordance with brake shoe wear.
The indicator light will illuminate when the ignition is ON and pulled the hand brake lever (activated).
When the indicator lamp lights up when the vehicle runs it shows a problem. When this happens do the following:
1. Menepilah and stopped.
2. Test the brakes carefully run the car and then stop on the road.
3. If you believe the brake still works run the vehicle carefully and to the authorized repair shop.
4. If the brakes do not pull the car to the garage to convince the official.
5. Always remember that braking distances may be longer on the brake injaklah stronger and in normal Events.
If the following conditions occur, check your vehicle torepair shop :
1. Warning lamp lights up, even though the machine was alive and not mengnci hand brake.
2. Warning lamp lights up when the car is running.
3. Warning lamp is not lit when the ignition key in START position.
4. Due to the brake system sets itself automatically, then the brake oil content is reduced in accordance with brake shoe wear.
Wiper and washer lever GLASS
At the position of the wiper lever.
Position LO
Rotate the wiper lever next to the LO position, the wiper will move slowly.
Position HI
Rotate one step ahead of the wiper position LO will move faster.
To stop the wipers move the lever to the OFF position
And to spray glass cleaner water, pull the lever toward the driver, and automatically the water will be sprayed into the glass and the wiper will move slowly.
To prevent damage to the wiper and cleaning glass components:
- Do not pull the lever if the water in the tank cleaning the glass is empty, it will cause engine damage.
- Do not turn on the wipers to clean the glass from dust or other impurities, if not dampened the glass first.
- Check regularly that there is water in the tank.
- Fill the tank cleaning the glass and do not exceed three-fourths of it is to prevent the tank for expansion.
- Do not use water radiator anti-freeze properties which have to be filled on Washer tank it will damage the paint surface when water is sprayed.
Position LO
Rotate the wiper lever next to the LO position, the wiper will move slowly.
Position HI
Rotate one step ahead of the wiper position LO will move faster.
To stop the wipers move the lever to the OFF position
And to spray glass cleaner water, pull the lever toward the driver, and automatically the water will be sprayed into the glass and the wiper will move slowly.
To prevent damage to the wiper and cleaning glass components:
- Do not pull the lever if the water in the tank cleaning the glass is empty, it will cause engine damage.
- Do not turn on the wipers to clean the glass from dust or other impurities, if not dampened the glass first.
- Check regularly that there is water in the tank.
- Fill the tank cleaning the glass and do not exceed three-fourths of it is to prevent the tank for expansion.
- Do not use water radiator anti-freeze properties which have to be filled on Washer tank it will damage the paint surface when water is sprayed.
Subscribe to:
Posts (Atom)