REPLACE OIL SERVICE WITH ATF CHANGER




Do not do the replacement oil is the manual way, ie waste through a landfill or with the tap, so the quality of the new oil will be mixed with the old oil so that the results are not up to the new oil.
Substitution of oil by way of manual can result in still tersisanya 70% long oil at the parts in the transmission.

ATF Changer is a tool used to wash and replace the transmission oil. With ATF Changer which replaced the old oil will drain completely without rest so that new oil put 100% no longer contaminated with residual oil.

Maximize your vehicle engine maintenance oil change using the ATF Changer, came to the Workshop Page. Teja Diamond / PT. Esa Sagara Autotara.

IMPORTANCE OF CLEANING AND CHOOSE GOOD BUSI



Misfiring spark plugs can affect engine power and fuel economy and can also damage the catalytic converter. You can replace spark plugs yourself for as little as $10 or pay $300 for a technician to do it.
Drivers get nervous whenever the "check engine" light illuminates on their dashboard. It can signal anything from a missing $3 gas cap to repairs costing thousands of dollars.
But think of the light as a way to stay on top of problems and extend the life of a car. Often, it's warning about problems that can be avoided by keeping up with regular maintenance, says CarMD, a maker of vehicle diagnostic equipment.
While maintenance is expensive, it's crucial as people hang on to their cars longer. According to R.L. Polk, an automotive data firm, the average vehicle on the road is now 10.6 years old, up from 8.8 years a decade ago.
Here are the five most common reasons your "check engine" light might come on, and what you can expect to pay for the repair, including labor, according to CarMD:
1. Faulty oxygen sensor
The sensor measures the amount of unburned oxygen in the exhaust and tells the car's computer how much fuel is in the tank. If a faulty one is not repaired, the car's gas mileage could drop, since the sensor is sending incorrect information to the car. It costs less than $200 to repair.
2. Loose or missing gas cap
Technicians will often tighten the gas cap for free, or replace it for a few dollars. If it's not replaced, gas will evaporate from the car and decrease its gas mileage.
3. Broken catalytic converter
This one isn't good news, since it can cost up to $2,000 to replace. The catalytic converter uses a catalyst — most often a precious metal such as platinum — to convert harmful gases left over from combustion to less harmful emissions. CarMD says catalytic converters generally won't fail unless a related part, such as a spark plug, malfunctions, so it's wise to keep up with the car's maintenance schedule.
4. Malfunctioning mass air flow sensor
This sensor measures the amount of air supplied to the engine, which determines how much fuel should be delivered. When it malfunctions, it can result in a loss of power to the car, surges during acceleration and a decrease in fuel economy. It costs around $375 to fix.
5. Misfiring spark plugs
Spark plugs are small but essential, since they make the car go by igniting the compressed fuel in an internal combustion engine. Misfiring spark plugs can affect engine power and fuel economy and can also damage the catalytic converter. You can replace spark plugs yourself for as little as $10 or pay $300 for a technician to do it.
CarMD says the total average repair cost in the U.S. is $305.56, including $202.28 for parts and $103.27 for labor.
The most expensive cars to repair? Hybrids. They remain rare enough that their parts are pricier and fewer technicians are trained to fix them.
The report is based on data from 170,000 vehicle repairs made between 1996 and 2010. The data came from vehicle owners and technicians who downloaded information to CarMD.

LEARN CAR WITH MANUAL DENTAL

Below are your teeth when 1-2-3-4-5-R is used (Setau gw); • Dental 1: at the time of new cars run / at the time of jams • Teeth 2: after the car was pretty run (after tooth 1) / on time will turn • Dental 3: highway with reasonable fluency • Dental 4: very smooth highway • Teeth 5: toll roads • Dental R: reverse I can forward, backward, turns, and nanjak loh Forward: 1. Injek full clutch. 2. Masukkin tooth 1. 3. Lift the clutch slowly while injek gas. 4. Deh street car. Backward: • Same aja kek forward. Diputer wheel to the left, bottom left car. Diputer wheel to the right, the car to the right buttock. Turn: 1. Turn ON cents (a print-shallow right-left it). 2. Injek clutch half. While injek brake if necessary (especially from high speeds). 3. Puter steering wheel to the left / right as needed Nanjak: (create conditions mao stop cars from the road in the middle ramp) Use the hand brake: 1. Injek full clutch. Masukkin tooth 1. 2. Lift the clutch slowly ampe machine voice sounded different. Somewhat gretek-gretek so. 3. Turunin handbrake. 4. Kalo bener koplingnya lift, his car would not resign but diem. Stay deh ngegas ato lift the clutch a little longer. Not use the hand brake: 1. Pas full clutch and brake condition diinjek, slowly lift the clutch the engine sounds different ampe. 2. Lift the foot brake. Kalo bener ga well the car would go down. The rest live ngegas ato lift the clutch a little. Grandfather talaga much for sharing that could gw muter-muter again tomorrow ah (great ass). Last week, already nearly crashing the gate house at the alley. But fortunately sempet brake. Haha I hope self God diberkatin tomorrow. Updated (14 february 2010/imlek n valentine ..) I've found a more effective way for car if the ramp. Rather than listen to the engine ampe gretek lakuin-gretek passable as follows: (with hand brake) 1. Longer fit in his ascent position the hand brake is removed and neutral gear. Injek masukkin to clutch and gear 1 (recommended for grade tooth 1 aja). 2. Lift the clutch slowly while injek gas (kek mao run regular car). Hand brake should not be lowered. 3. If his car already moving up slightly aja, directly turunin handbrake. Car not going to go down deh.

HOW driving Car

HOW drivingTYPE OF EXERCISE IS IMPLEMENTED:1. - Explanation of the main points of instructors who should be known by a driver.- Introduction of the car's instruments and how to use them.2. Technical mastery of the vehicle.a) Startb) Oper teethc) Stopd) Turn left / right3. Dismiss the car abruptly on the orders of an instructor without any errors / dead engine.4. Dealing with traffic problems:a) Runs perfectly on the highway, turn right ways / to left way through the intersection.b) Keep walking behind the vehicle is running slow.c) Pursue and passing another vehicle in the right way.d) Practice times must obey the general street and pay attention to all traffic regulations.5. Training skillsa) The road straight back as far as 50 meters.b) Play a vehicle in place that limited, between two cars.6. Exercise testa) Parking right leftb) Backward straight 50 metersc) parallel parkingd) Rise, forward / backward. The order Pedal: Clutch (always the left foot stepping on) the brake and gas using the right leg alternately. Turn the car in gear in a state of zero coupling:1) Connect the strap / belt.2) Turn the key to start the engine.3) Turn on the AC4) Lower the hand brake5) Hit the clutch out to move the teeth into the tooth 16) Lift the clutch slowly.7) As he stepped on the gas a little by little until you feel the car moving. backed:1) Hit the clutch out to move the teeth into the dental R.2) Lift the clutch slowly, feel until the car was moving backward, set the car moving pullback by stepping on and lift the clutch until the clutch sekuku (do more and do not lift too fast for the machine is not dead)
 Replace the tooth in a car while walking (right foot was stepped on the gas)1) Hit the clutch out.2) Raise gas3) Move the gear to the desired position4) Lift the clutch slowly5) Hit the gas, slowly, until you feel the way the car is stable according to the speed should be.6) Remove the foot from the clutch, set the course of a car just by stepping on the gas pedal and lift it. If the sleeping position.1) Raise gas, outboard brake pedal,2) Hit the clutch out, move into 1st gear3) Remove the clutch slowly, the car is run only by lifting the clutch sekuku until the clutch, or clutch does not have to step on to the car running properly.4) If the police feel the high bed, stepped on the gas a little by little until you feel the car get through the bumps.5) After passing the police to trample gas gas sleep slowly. Increase or decrease the tooth:1) Hit the clutch out.2) Raise gas3) Move the gear teeth to a desired4) Paste gas5) Lift the foot of the clutch slowly Stopping suddenly the car in a state car is running fast:1) Hit the brakes slowly until you feel mobilberhenti.2) Hit the clutch out3) Move the gear to gear or neutral o4) Remove the hand brake. Dealing with red using the brakes jammed dilampu1) stampede out clutch2) attach a foot on the brake3) Move the gear into 1st gear4) Agkat clutch a little to run the cars crawl or walk on it let the clutch out the car running alone. Dealing with red dilampu jam without using brakes or when going out of the alley into the street:1) Hit the clutch out.2) Attach the foot brakes3) Move the gear into 1st gear4) Lift the clutch a bit by bit to run the cars crawling.5) Or just stepped on the clutch out the car let it run itself.6) Attach the foot on the gas.- Stopped the car: Lift sekuku clutch and stepped on the brakes little by little.- Run the car crept: Lift the clutch sekuku with the position of the car will run crawl.

VEHICLE OF INTEREST

From the front
Vehicles can be towed from the front with all four wheels (front and rear) are not lifted.
- trasmisi position the lever in neutral position.
- Turn on warning lights (hazard)
- Derek vehicle slowly and carefully.

Vehicles can be drawn from the front with two front wheels removed:
- Position the trasmisi lever in neutral position.
- Turn on hazard warning lights.
- Derek vehicles with slow and careful (speed not exceeding 50 km / h)

From the back
Vehicles can be towed from the rear with two rear wheels lifted.
- For more secure, position trasmisi lever in neutral.
- Turn on hazard warning lights.
- Rotate the position of contacts in the ACG position for the steering wheel would not lock and make sure

  the front wheels in the straight state. \
- Derek vehicles to slow and speed not exceeding 50 km / hour.

HOW TO DRIVING IN ALL FIELDS

Driving on slippery roads.- On the road wet or slippery, the vehicle speed must be slowed to avoid a slip when stepped on the brakes.- Adjust the speed of the vehicle and do not make excessive acceleration, braking suddenly or turn the
   steering wheel abruptly.
Driving in the mountains.- When vehicles travel in hilly areas will lose power, to prevent this move trasmisi lever into a lower gear for

  engine returned to work at normal power, do it as quickly as possible so as not to lose the moment /
  energy.- When the path of decreasing energy use engine braking (engine brake) kegigi by moving lower.- Do not hold the brake too long or too often when taking down a long road, because the heat will make the
  brake so the brake can not work optimally.
Driving at high speed.When driving at high speed note the following.- Keep the distance required to stop the vehicle a short distance away.- By the time the new rain fall will occur hydropoling (loss of surface adhesion tire with road surface) caused

   by a layer of film. This will make it difficult to control steering and braking. To prevent this from happening,
   lowering vehicle speed when the road surface began to wet.- At high speeds the vehicle will get the side wind pressure that happens when exiting the tunnel or when
   large vehicles pass. To prevent this from happening to adjust the speed of your vehicle.
If the car miredIf the vehicle plunged into the mud or sand, consider the instructions below:- Use first gear and reverse position to swing the vehicle, the movement was carried out to obtain energy or

   moment to release the vehicle.- In the swing movement is slowly stepped on the gas pedal to spin the wheels are not high, high spinning
  wheel can make even more pent-up tires.

FUEL USAGE OF ECONOMIES

Instructions below will assist you in an economical fuel consumption.
- Avoid excessive idling rotation.
- If you have to wait a while as he parked the vehicle, turn off the engine and turn it back on if you want to

   run the car again.
- If you heat up the engine, leave the engine idling until the appointment of a needle spin temperature exceeds

   the position C.
- Avoid running the vehicle suddenly (snaps) from stop condition.
- Note the condition of the tires, adjust all tire pressures to specification.
- Check the condition of the air filter.
- Do not drive vehicle with a sudden from slow speeds.
- Keep the weight of cargo should not exceed the recommended limits.